Different diaper cakes!

I found this here: http://www.sweetaprils.com/2011/08/diaper-motorcycle-tutorial-diy-how-to.html  Loved it!

Motorcycle Diaper Cake Tutorial {DIY-How to Make a Diaper Motorcycle}

I finally decided to share a tutorial on how to make this beautiful diaper motorcycle (Diaper cake). I hope you enjoy it! This would be the greatest baby shower gift ever! I promise you that :) Email me if you have any questions!

**This tutorial is for personal use only. Make as many as you want for yourself or to give as a gift. Instructions and pictures are not to be copied or duplicated. Please do not sell diaper motorcycles made from this tutorial. You can place my link on your blog/website if you would like to share this tutorial. Thank you! {wink}**

Materials: 34 diapers Pampers Swaddlers Size 1 (17 for each tire), 8" cake pan, 2 rubber bands, 2 receiving blankets, 2 bibs, 1 chain link toy, a pair of socks or mittens, a baby bottle, 1 washcloth, scissors, pins, a stuffed animal, and decorative ribbon.

Make sure the gab between each diaper is even. See above picture #5? They are not even.

Pic #6: With one hand on top of the diaper, use the other hand to start pulling each diaper to the right until they all are even. Pic #7 is looking better...but pic #8 is perfect!

For pic #13: wrap each tire with ribbon of your choice. Place a pink to secure ribbon. The pin will at be the bottom of the tire. Do the same for the other tire. PLEASE NOTICE THAT THE FOLLOWING PICTURES DON'T HAVE THE RIBBON AROUND THE TIRES BECAUSE I FORGOT!!! I WAS TOO EXCITED! But make sure the ribbon is around the tires for the rest of the instructions. :)

Pic #14: Fold first receiving blanket in half...and roll it up like in pic #15 

Pic #16: If you want you can secure the end of the rolled up blanket with a pin just until you place the blanket through the tire opening.  

Picture #20: PLEASE note that we are working on the BACK tire.

For pic #24: Pull both ends of the blanket (following the arrows) to make sure the 2 tires are tight and the blanket too. Not too tight but firm. This will hold your entire motorcycle! Remember we are still working on the back tire.

For pic #25 place a pin in the inside of the tire opening securing the 2 blankets against the diapers. Make sure the pin is all the way in! then tuck in the remaining of the 2 ends of the blanket in the opining of the tire. You can see the finished back tire on Pic# 29.

Pic #26 shows the front tire first.

We are going to work on the handle now...Pic #28: roll up the second blanket...

Pic #29: Place the rolled up blanket through the opening of the FRONT tire.

Pic #35: If you would like you can roll up the wash cloth around the baby bottle.

To make the handle bars more stable follow instructions on pic #37 and #38

Pic #39: Put tissue paper inside the sock or mittens...it just looks better!

Pic #42: Place the other bib on top of the back tire.